Here is set of photos showing the progression of vapor polishing a plastic part. The first shot is of the part before polishing. The second is during vapor polishing. We only polished half of it to show the difference in finish that vaporing can offer. The final photo is of the part fully vapored. Many potential customers ask about having us vapor parts that they machined. Normally, we do the machining in house but we also offer vaporing as a service. The thing about vapor polishing though, is that any surface imperfections can be magnified. For example, if you give us a piece of machined acrylic, ultem, or polycarbonate that has heavy feed lines or chatter, the vaporing will bring out the poor finish. The truth is, poor finish in = shiny poor finish out. If your machining is fundamentally good and your surface finish is smooth, vapor polishing can brilliantly polish your plastic parts. Engineers and Machinists should also know that overly aggressive machining can impart stress in the finished parts. This can be problematic during the vapor polishing process because the parts may end up with crazing visible inside the material or on the surface. Ultimately, we like to do our machining in-house so we can be sure the parts our customers receive will be as good as possible. However, If your in-house machining work is strong, you will be very satisfied with East Coast Precision Manufacturing’s vapor polishing service. Can’t wait to hear from you!
East Coast Precision Manufacturing
Tags: acrylic, cnc, machined plastic, mill, milled, polycarbonate, ultem, vaporpolish